Utilities

Boxes and cabinets for both LV and MV for all electric utilities, we manufacture distribution boxes, individual or multi metering panels, protection and metering boxes for electricity meters, cabinets and distribution boxes up to 630A, small single-phase cabinets and three-phase meter cabinets , outdoor cabinets for high voltage,... etc.

 
We ca...

Boxes and cabinets for both LV and MV for all electric utilities, we manufacture distribution boxes, individual or multi metering panels, protection and metering boxes for electricity meters, cabinets and distribution boxes up to 630A, small single-phase cabinets and three-phase meter cabinets , outdoor cabinets for high voltage,... etc.

 
We can even manufacture special models adapted to your market. We specialize in complete electrical switchgear assemblies, always complying with the IEC-61439 standard

More

Utilities There are no products in this category.

Subcategories

  • High Voltage Metering...

    These cabinets are designed for the protection and measurement of individual electrical supplies, which are usually placed next to the power transformers on the outdoors but they can also be installed indoors.

     
    Suitable for all kinds of voltages:

     

    • Type 1 measuring point: Contracted power equal or superior to 10 MW.
    • Type 2 measuring point: Contracted power equal or superior to 450 Kw
    • Type 3 measuring point: Contracted power inferior to 450 kw, with a high voltage measurement.

     
    Manufactured with self extinguishing, fiberglass reinforced polyester and a SPECIAL foldable and sealable 6mm thick polyester back plate, machined for provision to fix 2 electricity meters (1 for a redundant option) and modem.

  • Protection Cabinets

    We also manufacture NH fusegear cabinets, flush mounted or floor standing with roof. Featuring our own NH fuseholder charge disconnector BUC

  • Distribution Cabinets...

    This box or cabinet holds all elements for the protection of the general power line and marks the beginning of the clients installations.

     
    It's made with a self extinguishing and sealable isolated enclosure which contains the connection terminals and fuse holders (BUC).

     
    In case there are several low voltage general supplies and as a consequence more than two fuse enclosures are needed, we will use protection panels with tripolar vertical fuse bases (CP/BTVC).

     
    The protection and distribution panels will be composed of BTVCs fixed with screws to a copper busbar system, always installed inside insulated enclosures.

     
    They'll be fixed to the wall through a frame, which will be screwed to the busbar.

  • NH Fuse Boxes CGP

    These panels hold protection elements for the general power line, and marks the beginning of the property of the user's facility.

     
    They'll preferrably be installed on the outside structure of a building, or somewhere with free and permanent access. The location will be set after a common agreement between the house owner and the electricity supply company.

     
    The installation can be:

     

    Overhead installation: The CGP can be wall mounted on a post or in the interior of a gap in a wall, which will have to be inside of the client's property. It will be installed aproximately 3-4 meters high above from the ground.

     

    Subterranean installation: The GCP will always be installed in a wall gap and it will be closed with a door, preferably metallic. The bottom part of the door will be at an aproximate distance of 40 cm from the floor.

  • Smart Meters Boxes

    The Safybox SMS System supposes an important innovation against the conventional multi meter panels that have been installed until now. It´s a modular isolating system for the housing of electricity meters compatible with remote management and Smart Grids or Smart Metering.

     
    In addition to adapting to the sizes and needs of the new generation of electronic meters that will be installed in the coming years, these new Uriarte SafyBox columns have reduced their weight by 30% and their volume by 40% with the consequent reduction in waste generation. With nature in mind, its made with recyclable and nontoxic materials, always matching the european policies for environmental impact.

  • Smart Meters Panel

    The Safybox SMS System supposes an important innovation against the conventional multi meter panels that have been installed until now. It´s a modular isolating system for the housing of electricity meters compatible with remote management and Smart Grids or Smart Metering.

     
    In addition to adapting to the sizes and needs of the new generation of electronic meters that will be installed in the coming years, these new Uriarte SafyBox columns have reduced their weight by 30% and their volume by 40% with the consequent reduction in waste generation. With nature in mind, its made with recyclable and nontoxic materials, always matching the european policies for environmental impact.

  • Outdoor Meter Boxes

    These low-voltage assemblies are designed for the protection and metering of individual and coupled (old homes, commercial buildings, industries, residential and industrial estates, etc.)

     
    Depending on the location of the installation (indoors or outdoors), there are different types of CPMs:

     

    • Indoors CPM installation.
    • Outdoors CPM installation.
    • Flush Mounting
    • On the pavement, plinth, or base.

     
    Likewise, the individual assemblies can be built to different types of power supplies:

     

    • Single-phased (houses up to 14 Kw).
    • Three-phased (houses up to 15 Kw)
    • Commercial buildings and industries (from 15 Kw)

     

  • Indoor Meter Boxes

    These low -voltage assemblies are designed for the protection and metering of individual and coupled (old homes, commercial buildings, industries, residential and industrial estates, etc.)

     
    Depending on the location of the installation (indors or outdoors), there are different types of CPMs:

     

    • Indoors CPM installation.
    • Outdoors CPM installation.
    • Flush Mounting
    • On the pavement, plinth, or base.

     
    Likewise, the individual assemblies can be built to different types of power supplies:

     

    • Single-phased (houses up to 14 Kw).
    • Three-phased (houses up to 15 Kw)
    • Commercial buildings and industries (from 15 Kw)
  • Utilities Accesories

    ...